|

¿Tienes problemas para liberar
móviles? Esta página está pensada para todos aquellos que actualmente
tienen problemas con sus actuales proveedores de
códigos de liberación de móviles, algo bastante común hoy en
día. Nosotros proveemos servicios de liberación por IMEI para todas las
marcas del mercado, con tiempos de espera optimizados y los mejores
precios. Todo de forma 100% segura y transparente, tanto para particulares
como para profesionales. Sistema de envío de mensajes SMS. Marketing
móvil.
Publicidad por SMS y Bluetooth
Liberar
Samsung, Blackberry, Nokia, LG
Liberar
moviles por IMEI Liberar
Yoigo, Vodafone, Orange, Movistar Liberar móvil
Productos anticeluliticos
Liberar iphone 4, Liberar iphone4 por
IMEI
BlackBerry Unlock Instructions
Notice: If the phone shows '0' tries remaining, your phone has already been hardlocked and cannot be unlocked by code. Even if you correctly enter the code your phone will still say "Code Error, Please Wait...".
If your phone shows '10' tries remaining every time you enter the code and you get a code error it means your phone is already unlocked.
Phone Unlock Instructions for BlackBerry Bold (9000), 8800, 8820, Curve (8300, 8310, 8320), Javelin (8900), Gemini (8520, 9300), & Onyx (9700):
Note: NO SIM is needed to unlock the phone. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.
1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT and press: mep2 (Please note that you will NOT see what you type on the screen)
7) It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked!
Phone Unlock Instructions for Bell Canada 9700 (Bold 2 Onyx):
Note: You must have a SIM card in your phone to complete these steps, I have found that this procedure works best with an Telus Sim card in the phone (can be active or inactive ). Make sure the phone is not displaying the low battery warning!
1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT and press: mep2 (Please note that you will NOT see what you type on the screen)
7) It will ask you for the mep2 code. Enter it and then press trackball to confirm.
8) After getting message 'Code Accepted', HOLD ALT and press the following: mep4 (Please note that you will NOT see what you type on the screen)
9 It will ask you for the mep4 code. Enter it and then press trackball to confirm. You phone is now unlocked!
Phone Unlock Instructions for Telus Canada 9700 (Bold 2 Onyx):
Note: You must have a SIM card in your phone to complete these steps, I have found that this procedure works best with an Telus Sim card in the phone (can be active or inactive ). Make sure the phone is not displaying the low battery warning!
1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT and press: mep4 (Please note that you will NOT see what you type on the screen)
7) It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked!
Phone Unlock Instructions for BlackBerry Pearl (8100, 8110, 8120, 8220):
Note: Remove any SIM that is currently in the phone. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.
1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT (Left side Below @) and press: mepp2 (Please note that you will NOT see what you type on the screen)
7) It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked!
Phone Unlock Instructions for BlackBerry 8830:
Notice: If the phone shows '0' tries remaining, your phone has already been hardlocked and cannot be unlocked by code. Even if you correctly enter the code your phone will still say "Code Error, Please Wait...".
SIM is REQUIRED to unlock the phone. SIM card can be inactive, it does not need to be activated. After your phone is unlocked, remove the battery, insert the SIM card you want to use and re-insert the battery. Phone MUST be restarted to use the new SIM card.
AT&T and T-Mobile WILL NOT work: This is a dual-band phone, it WILL NOT work in North America but will work fine in Europe, Asia, South America, and anywhere else where they use the other set of frequencies.
1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT and press: mep2 (Please note that you will NOT see what you type on the screen)
7) It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked!
If your phone shows '10' tries remaining every time you enter the code and you get a code error it means your phone is already unlocked.
Phone Unlock Instructions for BlackBerry 8700/8700c/8700g:
Note: SIM is REQUIRED to unlock the phone. SIM card can be inactive, doesn't need to active. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.
1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT and press: mepe (Please note that you will NOT see what you type on the screen)
6) It will ask you for the unlock code. Enter it and then press jog dial to confirm and your phone is unlocked!
Phone Unlock Instructions for BlackBerry 7105t:
Note: SIM is REQUIRED to unlock the phone. SIM card can be inactive, doesn't need to active. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.
1) Power phone on and turn off the radio (Turn Wireless Off option)
2) Go to Tools
3) Go to Settings
4) Go to Options and select Advanced Options
5) Go to SIM Card
6) Type "MEPPD" (please note that you will not see what you type on the screen)
7) HOLD ALT and press mepp2
8) Enter the Unlock Code
9) Press enter (press on Trackball)
10) Reboot device. Device is now unlocked
Phone Unlock Instructions for BlackBerry 7100/7130/7130c:
Note: Remove any SIM that is currently in the phone. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.
1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT (Left side Below @) and press: mepp2 (Please note that you will NOT see what you type on the screen)
7) It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked!
Phone Unlock Instructions for Blackberry 5xxx, 6xxx, 7xxx (Except for 7100):
Note: After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.
1) Power on
2) Go to Options.
3) Scroll to SIM CARD then press jog dial in once to select it
4) HOLD ALT (Half moon key on the lower left side) and press: mepe (Please note that you will NOT see what you type on the screen)
5) It will ask you for the unlock code. Enter it and then press jog dial once to confirm and your phone is unlocked!
Phone Unlock Instructions for Blackberry Vodafone Storm (9500):
1) Turn off the phone
2) Need a SIM card inserted into the phone (Example: Verizon, At&t, T-mobile)
3) Turn on the phone
4) Go to Settings (Button that has dots next to green call button), Click on Manage Connections, Select 'Turn All Connections Off'
5) Press End Call (Red button)
6) Go to Settings, then Options, then Advanced Options, then SIM Card 7) Hit the Settings Button (Button that has dots next to green call button) and select 'Show Keyboard'
8) Type in mepd (Please note that you will NOT see what you type on the screen)
9) Type in mep2 or mepp2 and another screen will pop-up prompting for the MEP code (Please note that you will NOT see what you type on the screen)
10) Enter the code, Remember you ONLY have 10 chances to get it right
11) Press enter and your phone is unlocked!
Phone Unlock Instructions for BlackBerry Storm or Storm 2 (9530, 9550):
1) Turn off the phone
2) Need a SIM card inserted into the phone (Example: Verizon, At&t, T-mobile)
For Unlocking Storm 2: Try the unlock process with a SIM card besides Verizon
3) Turn on the phone
4) Go to Settings (Button that has dots next to green call button), Click on Manage Connections, Select 'Turn All Connections Off'
5) Press End Call (Red button)
6) Inside Settings menu, Click Options, then Mobile Network, on the switch technology to 'Global' if that has not been done.
Exception: If phone prompts 'Would you like your Blackberry to automatically select CDMA or GSM based on network availability', select No.
7) Now click the Back Arrow Button (Next to the Red End Call button) and select Advanced Options and then SIM Card
8) Hit the Settings Button (Button that has dots next to green call button) and select 'Show Keyboard'
9) Type in mep2 or mepp2 and another screen will pop-up prompting for the MEP code (Please note that you will NOT see what you type on the screen)
Exception: If nothing is prompting up and you are making sure you are selecting each button by press the screen in, do a wipe handheld to reset the phone to manufacturer default: http://forums.crackberry.com/showthread.php?t=110075
10) Enter the code, Remember you ONLY have 10 chances to get it right
Exception: If phone says Code Error and the attempts stay the same, start off with 10 attempts and still says 10 attempts after enter code, then continue with instructions, this is a glitch on the phone
11) Press the Enter key (Button that looks like a backwards L arrow)
12) A message will appear saying Code Accepted
13) Turn device off by removing battery, insert SIM of your choice if have not done so already. Turning device is necessary even if you have SIM of choice inserted.
14) Turn the phone back on
15) Go to Settings, then Options, then Mobile Network, on the third row switch Network Technology to GSM/UMTS.
16) Press the Back Arrow Button to exit and save settings.
17) Return to the main screen by pressing End Call and you should see your phone getting signal
18) As a reminder, if you ever remove the SIM card from your phone, you will need to set the Network Technology as GSM/UMTS again
Issues:
1) If you have issues with the phone not recognizing the network, make sure the radio is on by making sure it is not low on power.
2) If you follow the above instructions and code is accepted with the Network Technology set to GSM/UMTS and still not working, it may be the SIM needs to be replaced with a newer SIM Card.
Removing "Activation Required" on the screen or changing the Phone Number:
1) On the main screen of the phone, press Call (Green Button)
2) Type on the screen: ##000000
3) Press the Call Button
4) For the Mobile Directory Number, put in your phone number in there
5) After you have done that, press the Menu Button to Save the options and the phone will automatically restart
6) After restarting, it will be updated
Phone Unlock Instructions for BlackBerry Tour (9630):
1) Turn off the phone
2) Need a SIM card inserted into the phone (Example: Verizon, At&t, T-mobile)
3) Turn on the phone
4) Go to Settings
5) Go to Options
6) Go to Advanced Options
7) Go to Sim Card
8) HOLD ALT and press: mep2 (Please note that you will NOT see what you type on the screen)
9) Enter the code, Remember you ONLY have 10 chances to get it right
10) Enter it and then press trackball to confirm and your phone is unlocked!
11) A message will appear saying Code Accepted
12) Turn device off by removing battery, insert SIM of your choice if have not done so already. Turning device is necessary even if you have SIM of choice inserted.
13) Turn the phone back on
14) Go to Settings, then Manage Connections, then Mobile Network Options and set the Network Technology to GSM/UMTS.
15) Set Network Mode to 3G & 2G.
16) Press the Back Arrow Button once to exit and save settings.
17) Inside the Manage Connections, set Mobile Network to on.
18) Return to the main screen by pressing End Call and you should see your phone getting signal
19) As a reminder, if you ever remove the SIM card from your phone, you will need to set the Network Technology as GSM/UMTS again
Issues:
1) If you have issues with the phone not recognizing the network, make sure the radio is on by making sure it is not low on power.
2) If you follow the above instructions and code is accepted with the Network Technology set to GSM/UMTS and still not working, it may be the SIM needs to be replaced with a newer SIM Card.
VERIZON TOURS ONLY: Removing "Activation Required" on the screen or changing the Phone Number:
1) On the main screen of the phone, press Call (Green Button)
2) Type on the screen: ##000000
3) Press the Call Button
4) For the Mobile Directory Number, put in your phone number in there
5) After you have done that, press the Menu Button to Save the options and the phone will automatically restart
6) After restarting, it will be updated
SPRINT TOURS: If you need to remove the Activation Required, you will need to get the MSL code to remove it. Contact me on costs.
How to Enter MSL Code on Sprint BlackBerry Tour (9630):
1) From the mainscreen of the BlackBerry, press the green call button to enter the phone
2) Type in ##MSLCODE then the green talk button (ie: ##123456 Green talk button)
3) In the CDMA service edit screen, delete the number in the first row (000000xxxx) and replace it with your current phone number
4) Press the menu key and choose save
5) The device will re-boot
6) When the device re-boots, Activation Required will be gone and the active carrier name will now appear
Blackberry 9650 Unlocking Instructions
Note:
NO SIM is needed to unlock the phone.
After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery.
Phone MUST be restarted to use the new SIM card.
1) Power on
2) Go to Settings
3) Go to Options
4) Go to Advanced Options
5) Go to Sim Card
6) HOLD ALT and press: mep2 (Please note that you will NOT see what you type on the screen) *
7) It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked!
* If your phone is a 9700 or 9000 that requires a second code (ie.Bell), please repeat until step 6 and press mep4 to enter the second code.
* Put your phone into GSM mode first, then when you press mepd, you will get a prompt
9650 Troubleshooting for signal issues:
1. Go to Settings, then Manage Connections, then Mobile Network Options and set the Network Technology to GSM/UMTS
2. Set Network Mode to 3G & 2G.
3. Press the Back Arrow Button once to exit and save settings.
4. Inside the Manage Connections, set Mobile Network to on.
5. Return to the main screen by pressing End Call and you should see your phone getting signal
6. As a reminder, if you ever remove the SIM card from your phone, you will need to set the Network Technology as GSM/UMTS again
HP Unlock Instructions
Phone Unlock Instructions for HP Glisten 3G, 6500, 6510, 6515, 6945, HW6510, HW6515, HW6920, HW6925:
1) Insert NON Cingular SIM into device
2) Power on the device
- Wait approximately 30 seconds until the SimLock application appears (the delay may be longer if the user has already attempted an unlock with the wrong code)
3) Enter the unlock code in the blank field
4) Press Ok
- If the unlock code is incorrect, an error dialog will appear. After pressing Ok on this dialog, the user has to re-enter the unlock code after delays (see above in Device Specific Information)
- If the unlock code is correct, a success dialog will appear.
5) Press Ok
HTC Unlock Instructions
Phone Unlock Instructions for G1, G2, 2125, 3125, 8100, 8125, 8525, 8900/8925 (Tilt), P4600 (Fuze), Dash, Dash 3G, Wing, Shadow, Excalibur 100, MDA, SDA, Touch Pro 2 (TP2), myTouch 3G, Magic:
1) Power on with Non-allowed SIM card
2) Enter unlock code when prompted
3) Enter code using the ON-SCREEN keyboard (This is if the screen HAS an ON-SCREEN keyboard) when unlocking a Pocket PC Phones
4) Press Ok
5) Phone Unlocked
Problems with bypassing G1 GMail account: This link provides information on how to bypass the login if are having issues when trying to use your phone with AT&T: Set-up AT&T on G1.
Phone Unlock Instructions for Verizon HTC Ozone, Imagio, Touch Pro 2:
1) Power on
2) Go to Settings
3) Go to Phone
4) Go to Network
5) Put phone on GSM mode
6) Go to Security
7) Go to Select SIM Manager
8) Go to unlock SIM
9) Phone will prompt for a code, enter the unlock code and press OK
Huawei Unlock Instructions
1) open Hyperterminal : C:\Program Files\Windows NT (should be there)
2) You must set com port on modem (Huawei Mobile Connect 3G Modem)
3) type following command : AT^CARDLOCK="<your unlock code>"
4) Validate by pressing Enter.
LG Unlock Instructions
How to Enter Unlock Code on LG CU320:
1) Power on the handset
2) In Idle screen, input the special code "277634#*#".
3) Enter the SIM Unlock code
4) Access the submenu "SIM Test" in Phone Test Mode.
5) Input the special code "2945#*#".
6) Access the submenu "SIM Unlock" which is just activated after the special code.
7) Input the 8-digit Unlock code in the "Enter unlock code" input screen.
8) It will be unlocked.
How to Enter Unlock Code on LG CU400/CU405:
1) Insert non-Cingular SIM card"
2) Power on the handset - Phone will display "Invalid SmartChip".
3) Enter 159753#*#
4) Enter the 8 digit SIM Unlock code
5) Select "OK".
6) The handset will be unlocked.
How to Enter Unlock Code on LG CU500:
1) Insert non-Cingular SIM card.
2) Power on the handset. Phone will display "Invalid SmartChip"
3) (IF THE PHONE DOES NOT DISPLAY INVALID SMARTCHIP, PLEASE POWER OFF AND ON AGAIN)
4) In Idle screen, enter 159753#*#. Phone will display "Enter NCK, Remaining 5
5) Enter the 8 digit SIM unlock code
6) Select "OK"
7) The handset is now successfully unlocked.
How to Enter Unlock Code on LG CU515:
1) Insert non-Cingular SIM card
2) Power on the handset - Phone will display "Invalid SmartChip".
3) Enter *#865625# then select option 1 and then again select 1
4) Enter the 16 digit SIM Unlock code
5) Device should say: Network Lock Deactivated
6) The handset is unlocked.
How to Enter Unlock Code on LG CU575 (Trax):
1) Put a non-Cingular sim in the phone
2) Phone says invalid smart chip
3) Now enter *#865625# then select option 1 and then again select 1
4) Enter your 16 digits code
5) Device should say: Network Lock Deactivated
6) The handset is unlocked.
How to Enter Unlock Code on LG CU720/TU720 (Shine):
1) Insert At&t SIM card
2) Power on the handset
3) Type *#865625#
4) the phone will ask you to input the unlock code twice, just input the unlock code
5) Device is now unlocked
If Above does not work
Try using a non-allowed SIM card (SIM that didn't come with the phone) and do the same steps for 2, 3, 4 & 5.
How to Enter Unlock Code on LG CU915/CU920 (Vu):
1) Insert At&t SIM card
2) Power on the handset
3) Type *#865625#CODE (CODE is the code we provided you)
How to Enter Unlock Code on LG C2000:
1) Insert non-Cingular SIM card
2) Power on the handset - phone will display "phone restricted"
3) Select "Cancel" - phone will display "phone restriction code"
4) Enter the SIM Unlock code
5) Select "OK" - the handset is now successfully unlocked
How to Enter Unlock Code on LG CT810 (Incite):
1) Dial this into the LG Incite's phone menu
2) 2945#*810#
3) Press CALL.
4) It should you ask you for the code.
How to Enter Unlock Code on LG CB630 (Invision):
1) Insert an AT&T or Cingular SIM in the phone; it does not have to be an active SIM
2) Dial this into the LG Incite's phone menu
3) *#865625#
4) Press CALL.
5) It should you ask you for the code.
How to Enter Unlock Code on LG GR500 (Xenon):
1) Turn on the phone to the main screen (Insert AT&T SIM Card)
2) Dial this into the LG Incite's phone menu
3) *#865625#
4) Press CALL.
5) It should you ask you for the code.
How to Enter Unlock Code on LG GT365 (Neon):
1) Turn on the phone to the main screen (Insert AT&T SIM Card)
2) Dial this into the LG Incite's phone menu
3) *#865625#
4) Press CALL.
5) It should you ask you for the code.
How to Enter Unlock Code on LG KE970 (Shine):
1) Switch ON your phone with an allowed SIM card
2) Then compose: 2945#*9701#
3) Press CALL.
4) It should you ask you for the code.
How to Enter Unlock Code on LG TU500:
1) Insert an Invalid SimCard
2) When 'invalid smartcard' appears, compose: 2945#*9701#
3) Press CALL.
4) It should you ask you for the code.
How to Unlock LG (Other models not listed, Example:CE110, CF360, CG180, CG225, C1300, C1300i, C1500):
1) Insert not-allowed SIM card
2) Power on the handset- phone will display "phone restricted"
3) Select "Cancel" - phone will display "phone restriction code"
4) Enter the SIM unlock code
5) Select "OK" - the handset is now successfully unlocked
Please Note: If having issues unlocking the CF360, use the instructions listed for the LG GR500 (Xenon)
Motorola Unlock Instructions
Phone Unlock Instructions for Blackflip, C139, v180, v190, v551, v557, v365, v3, v3i, v3r, v3re, v3xx, v3xxr, v3 RAZR, v8 RAZR 2, K1 (KRZR), K2 (KRZR2), VA76r (Tundra), v6, v8, v9, v9x, S9, SLVR, SLVR 2, c168/c168i, L2, L6, L7, Q/Q9H, MPX220, w233 Renew, w450 ACTV, w490, Z3, Z6, Z8 Rizr, Z9 & any other Motorola Phone:
1) Switch ON your phone with a not allowed SIM Card
2) Phone should show 'Enter Special or Subsidy Code',
3) Enter unlock code
4) Your phone is now unlocked.
WARNING: if any of these messages appear :
- "Contact Service Provider"
- or "Tamper Alter"
- or "Wait Before Enter Special Code"
- or "Contact Service'
It's because you or somebody else has already entered too many wrong codes. You just have to leave the phone ON on the error message and after 1hr - 8hrs the message "Enter Special Code" will appear again!
Issues with Q700 Motorola Slide Unlock Codes
If receive message: "WAITING FOR ACTIVATION A welcome screen will appear within 48 hours after purchase. If does not, call Custumer Care to check your account status. Until then, press menu to place emergency calls," you will need to press menu and the letter "L" at the same time, and the phone will be working.
Nokia Unlock Instructions
Phone Unlock Instructions for Nokia (all models):
At&t/T-mobile Nokia Phones, compose: #pw+CODE+1#
Rogers/Fido Canada Phones, compose: #pw+CODE+1# or #pw+CODE+7#
1) Remove SIM CARD
2) Type #
3) Then press the * key 3times (you should get a "p")
4) Then press the * key 4times (you should get a "w")
5) Then press the * key 2times (you should get a "+")
6) Enter unlock code sequence
7) Then press the * key 2times(you should get a "+")
8) Then enter: 1 or 7 (For your appropriate phone)
9) Enter: #
Palm Treo and Centro Unlock Instructions
Phone Unlock Instructions for Treo 650, 680, Centro:
1) Remove Treo battery, unplug cable
2) Insert incorrect a not allowed SIM card (one the phone does not accept)
3) Power on your Treo, 'Sim not allowed' is displayed, click OK
4) Go to the dial pad, and use the stylus to enter code *#*#CODE#. Then press 'Dial'. (substitute the word "code" with the unlock code we gave you).
5) Phone will reset and display 'sim lock removed'
Ensure you enter the codes in this manner *#*#CODE# (e.g. *#*#12345678#)
Troubleshooting
Error Message: "The SIM Lock has NOT been removed from this phone"
Solution 1: Please make sure you are entering the correct code and enter it using this method *#*#CODE# dial
Solution 2: If the phone says that the SIM lock has not been removed, ensure that the phone radio (wireless mode) is on.
If still having the error message "The SIM Lock has NOT been removed from this phone," the phone is likely refurbished and cannot unlock by code. Refurbished phones from the manufacturer are reflashed and take on a new IMEI. Because of this, the only way to unlock the phones is by software unlocking the phone.
Phone Unlock Instructions for Treo 750:
1) Power on with incorrect sim, enter unlock code when prompted
2) Enter code using ON-SCREEN (NOT physical keys) keyboard when unlocking a Pocket PC Phones
If above doesn't work
Wait for the next timout to complete. Then HOLD the white key button on the far left of the keyboard and then enter the unlock code with the PHYSICAL keys, not On-Screen.
Pantech Unlock Instructions
Phone Unlock Instructions for C3, C3B, C120, C300, C530 (Slate), C610, C630, C810 (Duo), C820 (Matrix Pro), C790 (Reveal):
1) Power on with Non-allowed SIM card
2) Enter unlock code when prompted
3) Enter code using the ON-SCREEN keyboard (This is if the screen HAS an ON-SCREEN keyboard) when unlocking a Pocket PC Phones
4) Press Ok
5) Phone Unlocked
ISSUE PANTECH DUO (C810): Many times you may face an issue saying "This phone only accepts SIMs from specific networks, and has been blocked. Contact your customer service center for the unblock code. Unblock code:
___________
New pin:
___________
Confirm new pin:
___________"
If you get this message, the issue is that your phone needs to have the newest Windows Mobile 6.1 installed. You can get this from here: Pantech Duo WM6.1 Update
Phone Unlock Instructions for C150, C520 (Breeze), C740:
1) Put AT&T SIM card in C740
2) Turn on
3) Enter *#865625# on idle screen
4) SIM Unlock Process - Click Yes.
5) Enter 8 digits unlock code and click OK (soft key)
6) Re-enter the unlock code.
7) Unlock Process Complete
8) Click OK (soft key)
Samsung Unlock Instructions
NOTE: If you enter a code and it shows 'Phone Freeze', this means the phone has been hard locked due to the number of wrong attempts. If you need the Freeze Codes, please contact us for prices.
How to Enter 'Phone Freeze' Codes
1) With wrong sim enter 8 digit freeze code press ok button
2) Then enter network unlock code
Do NOT use: #7465625*638*code#
At the moment, the Freeze Server is down. The manufacturer method should be up soon.
Phone Unlock Instructions for a BlackJack (i607/i617), Jack i637, or Samsung T939 (Behold 2)
1) Power on with Incorrect SIM
2) Phone will prompt for Network Pin
3) Use Code provided and press OK
ERROR MESSAGE: WRONG PASSWORD or INVALID CODE - If you receive one of these messages when entering the code for the Blackjack, the phone is likely to be refurbished. In cases like these, unlocking of the phone by code cannot be done, only by machine. Many cell phone shops do carry hardware devices (NsPro Box) to remove the unlock from the phones.
NOTE: If you are unable to connect to service provider or unable to make out going calls or recieve messages, this has nothing to do with your phone being locked or not, you need to force the BlackJack to change to GSM mode, this can be done as follows:
1) Power on your Phone
2) Enter *#1546792*#
3) Select Option 3 Network & Call Settings
4) Select option 5 Network Mode
5) Select GSM
Phone Unlock Instructions for a Samsung A117, A137, A167, A177, A237, A257 (Magnet), A436, A437, A517, A637, A657, A707, A717, A727, A737, A747 (SLM), A757, A767 (Propel), A777, A787, A797 (Flight), A817, A827 (Access), A837 (Rugby), A867 (Eternity), A877 (Impression), A887 (Sostice), A897 (Mythic), C417, i907 (Epix), X497, ZX10, ZX20, T219, T229, T239, T309, T319, T339, T349, T429, T439, T459 (Gravity), T469 (Gravity 2), T609, T639, T659 (Scarlet), T729 (Blast), T739, T749 (Highlight), T819, T919 (Behold), T929 (Memoir)
1) Power on without SIM card
2) Compose: #7465625*638*CODE# (by "CODE" I mean the unlock code I gave you)
Not Yet Personalized - If you see this message, it is another way of saying the phone is already unlocked.
Phone Unlock Instructions for a A127, P207, P777, D307, D357, D407, D807, T539 (Beat), T629, Z105 and Z107:
1) Power on without SIM card
2) Compose: #0111*CODE# (by "CODE" I mean the unlock code I gave you)
Not Yet Personalized - If you see this message, it is another way of saying the phone is already unlocked.
Phone Unlock Instructions for Samsung (all other models):
1) Switch ON your phone with a not accepted SIM card
2) Phone will ask for the "Password"
3) You can now enter the unlock code
Not Yet Personalized - If you see this message, it means your phone is already unlocked and your sim card is not activated or not functioning properly.
Sidekick Unlock Instructions
Phone Unlock Instructions for Sidekick (all models):
1) Insert a SIM card from a different network provider and turn on the Sidekick. A dialog screen comes up, prompting you for the code.
2) The box will say:
Title: Special Code Required
Dialog: Enter code to enable SIM
Box for Code: 1-8 digits
Options: Enable or Cancel
3) In the upper right hand corner, the SIM is flashing where the signal strength should be. On entering the code, a dialog box comes up saying authenticating code. It's unlocked. Enjoy.
In case you see the 'Waiting for Activation Screen', hit the menu key and the letter L key at the same time. The menu key is the top left key. By doing this, the waiting screen will go away and you will be able to make calls. For best results, hold down Menu and the L key until the Waiting for Activation screen disappears.
Siemens Unlock Instructions
Phone Unlock Instructions for C61, M56, S56, S66, SL56, SX56, SX66:
*#0001*yourunlockcode# or *#0000*yourunlockcode#
Sierra Wireless Unlock Instructions
Phone Unlock Instructions for Aircard 860, 875, 875u, 881, 881u, 885, 885u:
Please download and install Sierra Watcher. Once you have Watcher installed put the non-Cingular SIM into the card and Watcher will prompt you to enter the unlock code. Please make sure to enter the unlock code correctly.
If your phone has a "JOGDIAL" (for example SonyEricsson K700i), then you must press the "down arrow" instead of the "left arrow" for step 3 & 5. By "Down Arrow" I mean directing the Jogdial down!
Sony Ericsson Unlock Instructions
Phone Unlock Instructions for Sony Ericsson Cell Phones (Most models):
1) For the unlocking of a locked Sony Ericsson no sim card is required.
2) Turn on the handset. Display will indicate 'Insert SIM.'
3) Press the left Arrow (<) button.
4) Press the star (*) button twice.
5) Press the left Arrow (<) button again.
6) You will briefly see one of the following messages listed on devices display: 'Personalized with MNC2' or 'Personalized with MNC3'.
7) Wait approximately three seconds.
8) The display will indicate 'Network' and a picture of a closed lock.
9) Press Select.
10) The display will indicate 'Unlock (Net) 5' and 'NCK:'
11) Enter the 16 digit NLCK4U code (unlock code we provided you) and press okay.
12) The handset will display 'Network unlocked' and the display 'Insert SIM' appears.
13) The handset is successfully unlocked.
NOTE:
1) When doing the first 5 Steps, you need to do it fast.
2) If you get NCK: (0), this means the phone is hard locked. The phone cannot be unlocked since there have been more than 5 wrong attempts.
3) If you have tried a few times and are getting 'Not Allowed', your phone cannot unlock due to too many wrong attempts made on the phone. Phone has been hardlocked.
Phone Unlock Instructions for TM506:
1) Insert a T-Mobile SIM into the device.
2) From the main screen, press the Navigation key left.
3) Press the Star * key.
4) Press the Star * key again.
5) Press the Navigation key left.
6) The handset displays Network Locked.
7) Select OK.
8) Enter the 16 digit SIM subsidy unlock code.
9) Select OK.
UT Starcom Unlock Instructions
Phone Unlock Instructions for UTStarcom (all models):
1) Insert AT&T SIM card into phone
2) From the phone pad dial *#865625# and it will prompt for the code.
Keywords we use to help you find this page so you can unlock your cell phone:
How to enter unlock code - How to enter unlock codes - How to unlock cell phone with code - Code entry instructions - How to enter BlackBerry unlock code - How to enter Palm Centro unlock code - How to enter Palm treo Unlock code - How to enter Centro unlock code - How to enter LG unlock code - How to enter Samsung unlock code - How to enter Motorola unlock code - How to enter Sony unlock code - How to enter Sony Ericsson unlock code - How to enter Pantech unlock code - How to enter Cingular unlock code - How to enter AT&T unlock code - How to enter T-Mobile unlock code - T-Mobile Unlock Instructions - T Mobile Unlock Instructions - Cell phone unlock code directions - Cell phone unlocking directions - How to unlock cell phones - how to use unlock code - how to use cell phone unlock code - how to unlock my cell phone with code - how to type in my code - how to type in unlock code - how to punch in unlock code - how to put in unlock code - how to put in cell phone unlock code - how to enter code for cell phone
For the following models you must insert the original SIM and then:
* LG C3100 press 2945#*3101#
* LG C3380 press 2945#*7101#
* LG F2300 press 2945#*7101#
* LG KE260 press 2945#*2601#
* LG KE970 press 2945#*9701#
* LG KF390 and KF390q
* LG KF600 press 2945#*71001#
* LG KF755d press 2945#*755# (for this model, maybe you need to insert a not-allowed SIM card instead and then enter the sequence to enter the code)
* LG KG120 press 2945#*1201#
* LG KG220 press 2945#*1201#
* LG KG240 press 2945#*3311#
* LG KG280 press 2945#*7101#
* LG KG290 press 2945#*7101#
* LG KG800 press 2945#*7101#
* LG KP210a press 2945#*71001# (for this model, maybe you need to insert a not-allowed SIM card instead and then enter the sequence to enter the code)
* LG KP500 press 2945#*71101#
* LG KP265 press 2945#*265#
* LG KU250 press 2945#*250#
* LG KU380 press 2945#*380#
* LG LB40 press 2945#*40# ((for this model, maybe you need to insert a not-allowed SIM card instead and then enter the sequence to enter the code)
* LG TE365 press 2945#*365# (for this model, maybe you need to insert a not-allowed SIM card instead and then enter the sequence to enter the code)
Next, a secret menu will appear, go to settings-security-sim lock, enter NCK and press OK.
For the following models you must insert a not-allowed SIM and then:
* LG KS360 press 2945#*71001#
* LG KU311 and KU300 and U300 press 815118#*#
* LG KU800 press 82652#*#
* LG L600v press 815118#*#
* LG U8150 press 277634#*#
* LG U8210 press 277634#*#
* LG U8500 press 277634#*#
Enter NCK and press OK.
How to Enter Unlock Codes on LG TU750 Secret:
1. Insert original sim card and turn phone on.
2. Enter *#865625#
3. A menu will pop up, select USIM unlock
4. Select Network lock
5. Enter your unlock code
6. Enter the unlock code again
5. The phone will then reboot and the unlock is complete.
How to Enter Unlock Codes on LG W520:
- Power phone ON without SIM
- Type 2945#*71001# to enter unlock menu
- Enter unlock code
How to Enter Unlock Codes on LG GT500 (Puccini):
1. Insert original sim card and turn phone on.
2. Press telephone icon at bottom of screen to bring up the phone keypad
3. Enter 2945#*505#
4. A menu will pop up, select Unlock Usim
5. Then Select Network Lock
6. Enter your unlock code and press ok
7. The phone will then reboot and the unlock is complete.
If it does not work by 2945#*505, try with 2945#*500
How to Enter Unlock Codes on LG KP100:
1) Insert a not allowed SIM card
2) Press the unlock button
3) Enter the code
or
1. Insert allowed SIM.
2. Booting (Request PIN Code, PIN Code enable)
3. In Idle Screen, Input the hidden number.
(2945#*20001#)
4. Input the number (above), go back to the idle screen
5. Menu-4.Settings-7.Security-6.SIMLock Code:-1.Network Unlock Code:-1.Deactivate:
6. Select “1.Deactivate:” Menu, Display pop up “ SIM Lock Code:”.
7. Input right Unlock code, Display pop up “Deactivate".
8. Reboot, and unlock simlock code
How to Enter Unlock Codes on LG KF390 and KF390q:
1) Insert a SIM Card from the network the mobile is locked to and turn it on
2) Insert the following sequence *#865625#;
3) Select 'Unlock USIM'
4) Select 'Network Lock'
5) Insert the unlock code
6) Reinsert the unlock code
7) Select OK. Done!
How to Enter Unlock Codes on LG Prada (KE850 for example):
1. Switch the telephone on with Original SIM card inside.
2. Enter SIM pin if required.
3. Enter 2945#*8501# and press the call button (middle button bottom of the screen).
4. SIM unlock mode will appear on screen.
5. Enter unlock code
6. Select Reboot.
7. Switch phone off, and then turn back on again. Phone is now unlocked
How to Enter Unlock Codes on LG KE990 / KU990 Viewty:
1. Insert original sim card and turn phone on.
2. Press telephone icon at bottom of screen to bring up the phone keypad
3. Enter 2945#*990#
4. A menu will pop up, select sim unlock:
5. Another menu will appear, select Network lock.
6. Enter your unlock code and press ok
7. The phone will then reboot and the unlock is complete.
How to Unlock LG KG245 (Vodafone Australia):
1. Insert a Vodafone Australia working SIM card.
2. Ensure the phone is charged and then switch the phone on.
3. Optional Step: If the SIM card has a PIN, enter your PIN number
4. Wait for the phone to power up then enter 2945#*7101#
5. Select Menu , then go to Settings > Security > SIM Lock > Network
6. Select Deactivate and enter the 8-digit unlocking code provide for your handset.
7. The handset will be unlocked automatically and will display “Done”. This will be confirmed if you can make and receive calls with the Non-Vodafone Australia SIM card. (You will need reception and phone credit with the different network provider)
How to Unlock LG KG800 or TG800 Chocolate:
1. With the phone in standby, enter 2945#*7101#. This will activate the extra menu.
2. Go to: Settings>Security>SimLock>Network
3. Select deactivate. Enter the unlock code, which you can buy in my store unlock-cell-phones.
How to Unlock LG C2000:
1. Insert non-Cingular SIM card
2. Power on the handset - phone will display "phone restricted"
3. Select "Cancel" - phone will display "phone restriction code"
4. Enter the SIM Unlock code, which you can buy in my store unlock-cell-phones.
5. Select "OK" - the handset is now successfully unlocked
How to Enter Unlock Codes on LG F2250:
1. With allowed sim card in the start menu type: 2945#*3311#.
2. Handset shows saved, then return to startup screen
3. Press Menu key, choose Settings > Security > Sim Lock> Network > Deactivate, handset will now show 'Enter NCK'
4. Enter your unlock code and press OK. If you don't have an unlock code yet, you can get it in my eBay store.
How to Enter Unlock Codes on LG U8150:
1.
Switch ON your phone with a not allowed SIM card.
2.
Compose: 277634#*#.
3.
Go to menu "SIM Lock".
4. Enter your unlock code and press OK. If you don't have an unlock code yet, you can get it in my eBay store.
How to Enter Unlock Codes on LG U8110:
1. With a not allowed sim card in your phone enter Pin code then validate, type: 277634#*#
2. Select 'Sim Unlock' menu #
3. Enter your unlock code and press OK. If you don't have an unlock code yet, you can get it in my eBay store.
4. Your phone is now unlocked.
How to Enter Unlock Codes on LG U8210:
1. With a not allowed sim card enter Pin code then validate, type: 277634#*#
2. Shows test menu
3. Choose sim test menu and type: 2945#*#, choose Sim Unlock menu
4. Handset shows 'Enter NCK'
5. Enter your unlock code and press OK. If you don't have an unlock code yet, you can get it in my eBay store.
How to Enter Unlock Codes on LG U81xx:
1. To bring up the unlock menu on the phone with a SIM card, type 2945#*88110#
2. Enter your unlock code and press OK. If you don't have an unlock code yet, you can get it in my eBay store.
In case you need to reset the phone without a SIM card first, type 277634#*# or 47328545454#.
How to Enter Unlock Codes on LG U8360:
1. Insert a not accepted SIM Card and turn ON your LG U8360.
2. Your LG U8360 will display "phone restricted".
3. Select Cancel
4. Your LG U8360 will display "phone restriction code".
5. Enter the Unlock CODE.
6. Select OK
7. Your LG U8360 is now unlocked!
How to Enter Unlock Codes on Cingular AT&T LG CU575 TRAX:
1. Insert non-Cingular SIM card.
2. Power on the handset. Phone will display "Invalid SmartChip"
3. Now enter *#865625# then select option 1 and then again select 1 and enter your code.
How to Enter Unlock Codes on TU500:
- Insert the SIM card to the phone’s slot
- Switch on the power of handset.
- You must see the message appears ‘Invalid SmartChip’. If you can see that message display in your phones, what you need is switch off the power of your phone and back it on again. Repeat this step until the message appears.
- Now in idle screen enter 159753#*#.
- On the phone appears “Enter NCK, Remaining 5”
- Enter the SIM unlock code you’ve got.
How to Enter Unlock Codes on Cingular AT&T LG CU500/CU400:
1.
Insert non-Cingular SIM card.
2.
Power on the handset. Phone will display "Invalid SmartChip"
3.
(IF THE PHONE DOES NOT DISPLAY INVALID SMARTCHIP, PLEASE POWER OFF AND ON AGAIN)
4.
In Idle screen, enter 159753#*#. Phone will display "Enter NCK, Remaining 5
5.
Enter the 8 digit SIM unlock code. If you don't have an unlock code yet, you can get it in my eBay store.
6.
Select "OK". The handset is now successfully unlocked.
How to Enter Unlock Codes on Cingular AT&T LG CU515:
1. Insert non AT&T SIM
2. Turn on the phone
3. Phone says invalid smart chip
4. Enter *#865625#
5. Yes to Unlock
6. Enter your 16 digit unlock code.
How to Enter Unlock Codes on all other LG cell phones:
1.
Switch ON your phone with an allowed SIM card
2.
Then compose:
3.
2945#*5101# - (if you have a LG 510w)
4.
1945#*5101# - (if you have a LG 1200 & B1200)
5.
2945#*5221# - (if you have a LG 5200 & 52200)
6.
2945#*5301# - (if you have a LG 5300)
7.
2945#*5401# - (if you have a LG 5400)
8.
2945#*70001# - (if you have a LG 7020)
9.
2945#*7101# - (if you have a LG 7100)
10.
2945#*1201# or 2945#*70001# - (if you have a LG 1100 or 1150)
11.
2945#*70001# - (if you have a LG7250T)
12.
2945#*2201# - (if you have a LG C2200)
13.
2945#*5301# - (if you have a LG T5100)
14.
2945#*3311# - (if you have a LG C3310)
15.
Go to "Menu" and then to "Settings"
16.
Then select "Security"
17.
To finish select "Network Provider" and select "Deactivate"
18.
Enter the unlock code. If you don't have an unlock code yet, you can get it in my eBay store.
19. If your cell phone is not listed, please follow instructions for LG C2000 above
How to Enter Unlock Codes on LG U400 Shine (2 codes needed):
1. Insert the network SIM in the handset which works with the phone (from the locked carrier).
2. Enter 2945#*9636#.
3. The phone will then prompt 'Unlock sim'. Press OK.
4. The phone will then prompt 'Network Unlock'. Press OK.
5. The phone will then prompt- 'Input Network Control Key'. Enter the 8 digit unlocking code. If you don't have an unlock code yet, you can get it in my eBay store. Press OK. If the unlocking code comes with only 7 digits, add a 0 in front of the 7 digit code. If the unlocking code comes with only 6 digits, add 00 in front of the 6 digit code. If you received a 16 digit code, enter it. The phone will have space for it.
6. It should give you the message: Success.
7. Come back to the main screen and Enter 2945#*9636#.
8. The phone will then prompt unlock sim. Press OK.
9. The phone will then prompt Network Unlock/ Lock but if you scroll down you will see a message Enter SP Lock. Enter SP Code. If you don't have an SP unlock code yet, you can get it in my eBay store.
10. Then press OK.
How to Enter Unlock Codes on LG KE970 Shine:
1. Insert original sim card and turn phone on.
2. Press telephone icon at bottom of screen to bring up the phone keypad
3. Enter 2945#*990#
4. A menu will pop up, select sim unlock
5. Enter your unlock code and press ok. If you don't have an unlock code yet, you can get it in my eBay store.
6. The phone will then reboot and the unlock is complete.
OR
1.
Switch ON your phone with an allowed SIM card
2.
Then compose: 2945#*9701#
3. Press CALL.
4. It should you ask you for the code. If you don't have an unlock code yet, you can get it in my eBay store.
How to Enter Unlock Codes on LG TU720 Shine
1. Put in a non-allowed SIM, phone says invalid SIM card (or insert original SIM and proceed to step 2)
2. Now enter *#865625# then enter your 16 digits code. If you don't have an unlock code yet, you can get it in my eBay store..
OR
1. Insert the original network SIM
2. Enter 2945#*88110#.
3. The phone will then prompt ' Unlock sim'. Press OK.
4. The phone will then prompt 'Network Unlock'. Press OK.
5. The phone will then prompt- 'Input Network Control Key'. Enter the 8 digit unlocking code. Press OK.
6. If the unlock ing code comes with only 7 digits, add a 0 in front of the 7 digit code. If the unlocking code comes with only 6 digits, add 00 in front of the 6 digit code.
7. It should give you the message Success.
8. Come back to the main screen and Enter 2945#*88110#.
9. The phone will then prompt unlock sim. Press OK.
10. The phone will then prompt Network Unlock/ Lock but if you scroll down you will see a message Enter SP Lock. Enter SP Code.
11. Then press OK.
How to Unlock LG (other models not listed in this guide):
1. Insert not-allowed SIM card
2. Power on the handset- phone will display "phone restricted"
3. Select "Cancel" - phone will display "phone restriction code"
4. Enter the SIM unlock code
5. Select "OK" - the handset is now successfully unlocked
How to Unlock LG KG800 Chocolate Without a Code (not reliable):
1. Insert SIM from the network that it is locked to.
2. Turn on phone.
3. On home Screen, slide up phone.
4. Type 2945#*#
5. ENG. Mode menu should appear.
6. Go Down to Factory Reset. Select it. May take a few minutes to reset!
7. This will reset the phone back to before the phone was locked to a network.
8. The phone will automatically restart (the network logo at start up will not change).
9. Now insert any SIM card and the phone should turn on normally
10. The phone is now unlocked and you can customize the setting as you like.
|